Redcat Racing EPX Drift Car 1/10 4WD Ready-to-Run with Metallic Blue Body

The Redcat Racing EPX Drift Car 1/10 4WD Ready-to-Run offers a platform for on-road drifting with a metallic blue body designed for style and performance. Equipped with a 27T 540 brushed motor, 7.2V 2000mAh NiMH battery, and drift-specific tires, this RC drift car provides a balance of control and slide for enthusiasts. Its 4WD system and tunable suspension suit both beginners and experienced drivers looking for a remote control drift car for paved surfaces like asphalt or indoor tracks.

Performance

The EPX Drift Car delivers consistent power through its 27T 540 brushed motor, enabling speeds up to 18 mph with the included NiMH battery. The 4WD system supports controlled drifts on smooth surfaces, though some feedback suggests upgrading to a 2S LiPo battery can increase speeds to 23–24 mph for better performance. Without a gyro, precise throttle control is needed for smooth slides, and high-speed turns may feel unstable without adjustments to toe or camber settings. The car handles well on painted surfaces but struggles on uneven terrain due to low ground clearance.

Build Quality

The lightweight plastic chassis aids quick drift recovery, while the aluminum-capped oil-filled shocks enhance durability. The plastic suspension arms and body posts may wear over time, especially with frequent crashes, but Redcat offers an aluminum hop-up kit for added strength. The waterproof ESC and servo housing protect electronics from minor splashes, though heavy water exposure should be avoided. Some reports note inconsistent factory assembly, such as misaligned toe or camber, requiring manual tuning for optimal performance.

Control

The 2.4GHz radio system provides reliable control up to 100 meters, with adjustable steering and throttle trims suitable for dialing in drift precision. The Hexfly high-torque servo offers responsive steering, though some users report occasional servo noise or slight input lag at long ranges. Beginners may need time to adjust settings for consistent drifting, as the car requires manual tweaks out of the box. The lack of a wheel hex tool in the package can make initial setup less convenient.

Design and Features

The metallic blue BL10315 body features a sleek, drift-inspired design with detailed decals, though it lacks a specific real-world car replica. The drift-specific tires and lightweight chassis support smooth slides, while the tunable suspension allows adjustments for ride height, toe, and camber. The 2000mAh NiMH battery provides about 15–20 minutes of runtime, with a 4-hour charge time via the included NiMH charger. The absence of LED lights limits nighttime visibility, and the sparse manual may require additional research for setup details.

Special Notes: This is a Ready-to-Run model, fully assembled with a painted metallic blue body, 7.2V 2000mAh NiMH battery, and charger included. Requires 4 AA batteries for the transmitter (not included). Suitable for beginners learning to drift, but experienced users can upgrade parts for enhanced performance.

Specs & Features

• Scale: 1/10, with a generic drift-style body (BL10315).
• Motor: 27T 540 brushed motor for consistent power.
• Drive System: 4WD with forward/reverse ESC, no gyro.
• Battery: 7.2V 2000mAh NiMH, ~15–20-minute runtime, NiMH charger.
• Transmitter: 2.4GHz, ~100m range, requires 4 AA batteries.
• Speed: Up to 18 mph (NiMH), 23–24 mph (2S LiPo, optional).
• Tires: Drift-specific tires for on-road sliding.
• Suspension: 4-wheel independent, adjustable toe/camber/ride height.
• Body: Pre-painted metallic blue with decals.
• Features: Aluminum-capped oil-filled shocks, waterproof ESC/servo.